Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Florida

Deck Restoration & Staining for Cedar in Florida

Low-pressure wash for cedar. Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer. Typical cost $800-$2,500.

When we handle deck restoration & staining for cedar in Florida, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. For cedar, that means low-pressure wash.

Method and pressure

Low-pressure washCleaning method
Usually 500-800 PSI; cedar is soft and marks easilyPressure

Cleaning solution: A wood cleaner and brightener suited to cedar.

Caring for cedar

Cedar decks and fences turn silver-gray as the surface weathers. Gentle cleaning with a wood cleaner and brightener brings back the color, and a penetrating stain keeps it longer.

Avoid: High pressure, which gouges the soft wood and raises the grain.

How often: Clean yearly; refinish every 2-3 years.

Signs you need deck restoration & staining for cedar

  • Stain peeling, flaking or worn through in traffic areas
  • Gray wood that soaks up water
  • Cracking, splitting or splinters
  • Black spots that come back after washing

Why it gets dirty

  • UV breaking down the stain and wood surface
  • Film-forming stains that peel instead of wearing
  • Water standing on boards
  • Mildew feeding on old finish

What you can do yourself

  • Do the 'water drop test': if water soaks in instead of beading, the wood needs sealing
  • Replace or fasten loose boards and popped nails first
  • Keep the deck clean between finishes

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Stain over dirty or damp wood, which peels quickly
  • Stripping with too much pressure
  • Mixing incompatible old and new stains
  • Staining in direct hot sun, which leaves lap marks

What happens on the day

  1. Inspect the deck and the old finish and choose a stain with you
  2. Clean or strip the old finish
  3. Brighten the wood and let it dry fully
  4. Sand rough spots where needed
  5. Apply a penetrating stain or sealer and allow it to cure

Deck Restoration & Staining for Cedar cost in Florida

$800-$2,500Typical range for a typical 200-400 sq ft deck with rails
1-2 days including dry timeTypical time on site
Every 2-3 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for cedar

Serving Florida and nearby towns

Wood decks and fences in Florida mildew fast and can rot where water and leaves sit. Cleaning every year and refinishing every two to three keeps the wood sound.

Spring pollen season in Florida coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Much of Florida has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

We cover 682 cities and towns across Florida. Find deck restoration & staining for cedar in your city:

Deck Restoration & Staining for Cedar: frequently asked questions

How much does deck restoration & staining for cedar cost in Florida?

Deck Restoration & Staining for Cedar typically costs $800-$2,500 for a typical 200-400 sq ft deck with rails, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for deck restoration & staining for cedar?

For cedar: usually 500-800 PSI; cedar is soft and marks easily. What we avoid: high pressure, which gouges the soft wood and raises the grain. The cleaning solution does most of the work, followed by a gentle rinse.

Is deck restoration & staining for cedar safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule deck restoration & staining for cedar?

Clean yearly; refinish every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Florida

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

House Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$700

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Concrete Sealing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $400-$1,200

Pressure Washing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$600

Soft Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$800

Rust Stain Removal

Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry.

Typical $150-$500

Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$600

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Paver Cleaning & Sealing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $600-$1,800

Garage Floor Cleaning

Garage floor degreasing and pressure washing to lift oil, tire marks and road salt residue.

Typical $100-$300

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Ready for a cleaner home or business?

Get a free pressure washing quote in Florida. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote